Download and Install Necessary Tools and Drivers. Odin software Samsung Drivers. Find and Download Samsung Firmware. Visit our following website:. Is it for galaxy y? Have u tested it? Yes it will work with galaxy y. I Have tested it. Actually it is universal and will work with every Samsung.

Any time your phone gets stuck on the Samsung logo and reboots infinitely, it's stuck in a boot loop. This can happen when the wrong files are flashed or as a result of software or other glitches on your Galaxy Y. To get out of a boot loop, you'll need to follow the steps listed below. Keep in mind that like all processes involving system level changes, you should always make sure your battery is fully charged before starting, and not attempt to restart or otherwise interrupt the process.

Also, you will lose any data that is not backed up or saved elsewhere. Help, my phone becomes still at the Samsung logo 'Samsung' and after a while, it again repeats. What will I do? You are in a phone problem called boot-loop. This is what happens when your phone has problems with its software or gets updated with the wrong software. Getting out of a boot-loop is easy.

Filme a ultima batalha. You just need to flash your device with the right firmware using ODIN. The previous section discussed the detail on how to perform the flashing procedure on your Samsung Galaxy Y. Follow it to get back to your device. Well, there might be some problems in loading all your applications on your phone and it repeatedly re-boot could be caused by a failure in your boot options. To recover your phone, the best solution is to do a restore default settings. However, it will erase everything on your phone and SD card all your files.

But if you are willing to do this, you can go to the option by using these combinations. Tap and hold these keys for around 2 - 5 seconds, power on, volume +, and home button. You will then see an option and choose the restore data default or anything similar.

It will wipe out all your applications and files though. See more questions like this: Computer does not detect my Galaxy Y; what will I do?

If your Galaxy Y is not detected by your computer, then there are four points that you need to consider: • Make sure the problem is with your computer's USB port. Insert another USB device into your computer.

If the device is detected, then there is no problem with the computer's port. If the device is still not detected, then the port may be defective. Connect to another working port, so that your computer will detect your phone.

• You do not have the right drivers for your phone. This is one of the most common reasons why your phone is not detected by your device.

Download on your computer, extract the downloaded file on your PC and open the installation file. Install it to your PC and restart your computer. Connect your phone to your computer via USB cable and it will now be detected. As an alternative, you can download and install [www.samsung.com/us/kies/ Samsung Kies] on your computer. When connected via USB cable, Kies will detect your phone from your computer.

You might be using the key combinations really wrong. Those key combinations must be pressed while your phone is turned off. And you must press it all together and hold it for a couple of seconds. Try pressing and holding only the power button + volume up key in order to perform the Hard Reset. Also, make sure that you are pressing this combination while the device is fully powered down. See more questions like this: M Samsung Galaxy keeps on rebooting itself. I can't even open it?

My Samsung Galaxy keeps on rebooting itself. I can't even open it Since you cannot proceed with opening your phone, you need to clean its cache partition by completing the following steps: • Remove your battery and put it back again. Download mode is far way different than recovery mode. How can I open Samsung Galaxy y using the connection of the computer with a broken power switch? How can I open Samsung Galaxy y using the connection of the computer with a broken power switch You can boot your phone into Download mode.

To do that press and hold the Power + Home Key + Volume Down. This will take your phone to download mode. Cancel download mode by pressing the Volume down to reboot your phone.

You will now be able to start your phone normally and use it without the power button. Or on dial mode: *2767*3855# NOTE: All data will be deleted. Backup if you can.

As for the volume down, have your phone checked and fixed so that you can use the said button when needed. See more questions like this: GTS5360 on off switch print damage? One print damage please help me for this problem Are you saying that your on & off switch in your Samsung Galaxy Young s5360 is damaged and can't be press, if it is so; to be able to use it again or to fix that problem you will need a help from some technicians. If you are trying to do some jumpers for your device in its motherboard then this picture might help you out a bit. How to remove other operating systems back to Android? I installed JB OS, but was not working well so I installed recovery clockwork mode which has refused my phone to operate. So I guess taking back to Android OS would help, but I don't know how to do it.